Quote:
Originally Posted by gmc
No need to unplug when you start the genny...
The transfer switch prevents two input sources, so no safety issue.
In addition the transfer switch ‘preference’ is to genny if running (proper voltage present on genny input to transfer switch) - so when genny starts, and voltage stabilizes, that source will be used.
When you turn off genny, load will switch back to shore power.
|
What he said.
But just to make life easier shut down the A/C before powering up the generator. Give the A/C a couple of minutes for the high pressure side to bleed down some before bringing it back on line.
Thor Forums
