Quote:
Originally Posted by 55Pont
Well, the "suicide cord" was activated by me with the fused switch on the strip. My concern, of course, was short and fire, so I was ready to shut off immediately if fused strip had not acted. Fire extinguisher at the ready.
The shore power cord was the 1st place I checked with the multimeter. Voltage in and at the output also. Am wondering if the ats might be behind the breaker box. Obviously, running backwards, the circuit is complete.
Perplexing. Reply appreciated. Robert
|
I'm not complaining about the use of the suicide cord, It's just a different approach that could certainly prove useful.
Generally, the ATS is between the SP cord inlet and the breaker (distribution) panel.
Can you clarify if you have a 30 or 50 amp system? It could certainly make a difference on your troubleshooting efforts and the help from this forum.
Thor Forums
