Quote:
Originally Posted by Pabs4
Finally, can anyone tell me what the firewall looks like and where it is located? I have tried to research it for myself but have been unsuccessful.
Thanks,
Pam
|
Its the metal wall between the engine comparment and the inside of the vehicle. Usually you will see the brake boosters bolted to it. Just look under your hood - cant miss it.
Cover the entire under side of your dash starting at the bottom of the windsheild to the fire wall. Then go down the fire wall and roll it under the RV until you run out of good places to stick the insulation to.
Leave opening for wires / hose to poke though. I take your time, it took me hours to insulate my RV properly and I never regreted it. Use a roller to press the insulation firmly for proper adhesion. I duct taped a two or 3 foot pole to a roller in order to push up/back the insulation where my arms could not ready.
I put one to two layers of Dynomat type down first and one to TWO layers of Fat Mat 3/4 inch foam insulatation. But you will want a minium of one layer of each type.
__________________
2017 Axis / 25.4: Big Foot Levelers, Aims 1200 Watt inverter, Ceramic Window Tint, Full River AGM 6V batteries, Front Hellwig Sway bar / Rear Track Arm, Safe T Plus Steering Stabilizer, PD 4655 converter, Hard Wired Surge Guard, WEboost + WiFi Ranger, LED Headlights/Driving lights, TPMS, Surge tank, Tornado flush, Viair Compressor
|