Quote:
Originally Posted by Judge
Thanks for the additional info!
If the steps aren't too involved to post, it would be great but my biggest question is the power supply you used.
I have the video splitter in my Outlaw 29H as well that takes my 3 cameras and sends it to the single input in the Axxera radio.
The monitor you used looks nice and those splitter cables are perfect. I think I can figure it out from there once I know what you used for the power supply.
|
The power supply that goes into the video splitter has one red power wire and four ground wires. One of the wires appears to be dead. Someone please correct me if I've got this one wrong.
I trimmed the connector off of that 6-wire bundle and used the red power wire for the three cameras and also the monitor. I used the four separate grounds for the three cameras and one monitor. (Don't know if I needed to do that, but it worked.) The cables from rearviewsafety.com also include a power supply cable, pictured here:
This is what you will connect to the power and ground wires that you trimmed from the connector and is what powers your cameras.
Let me know if this makes sense.