Quote:
Originally Posted by LDK
I received the email from Leon this morning. Look forward to hearing what you learn.
|
I received the new wireless, back-lit switches (control pads) this week and installed them! The process was pretty simple and only took about 10 minutes. The switches ended up costing $135/ea. and required no programming adjustment on the Firefly system. They will snap into the original backing plates as well. Keep in mind that your 'mileage may vary' if your control panel doesn't allow for 'pairing', etc. based on your firmware version.
Click Here for New Switches Video
Side by side comparison of the new switches vs. old switches. Only noticable physical difference is that the old switches have a gloss bezel while the new switches are matte:
Process to 'pair' new switches on 4.3" B&W screen in 2017 Aria 3901:
Step 1: Prep the new switches by pulling the battery protector tab and making sure they light up when you press a button
Step 2: Go to 'settings' and select 'Switch Info' on the main control panel
Step 3: Hold down the switch you are replacing for 5+ seconds and release
Step 4: Select 'start pairing' (note: you have 30 seconds to complete the next task)
Step 5: Hold down any two buttons on the new switch until the main control panel acknowledges the pairing is successful (takes about 3 seconds)
That's it! This should be the result:
Thor Forums
