Quote:
Originally Posted by gnach
I had some time to finish up my closet shelving mod. I used the Closet Maid 16" wire shelving from the Depot. I bought 3 pieces x 6ft. The top shelf is supported in the front by small shelf angle bracket and by coax cable supports in the back. Zip ties hold it to the front brackets. The cubby unit was cut to fit below the top. The sides fit up tight to the top shelf and are notched in front for the top shelf's lip and for the existing closet pole. Two shelves were cut from leftover side piece. The side were cut with the heavier 1/4" rods cut flush. The shelves were cut in between the small wire so the 1/4" rods are ~1/2" long and rest on the small wires (horizontal) on the side pieces. Zip ties were used to hold it all together. I used a reciprocating saw for all cuts.
 |
Thats awesome. I like the idea of having a shelve at the very top from end to end. Great place to put shoes or other stuff you dont need every day or week.
__________________
2017 Axis / 25.4: Big Foot Levelers, Aims 1200 Watt inverter, Ceramic Window Tint, Full River AGM 6V batteries, Front Hellwig Sway bar / Rear Track Arm, Safe T Plus Steering Stabilizer, PD 4655 converter, Hard Wired Surge Guard, WEboost + WiFi Ranger, LED Headlights/Driving lights, TPMS, Surge tank, Tornado flush, Viair Compressor
|
Thor Forums
