Quote:
Originally Posted by Tacouser
This T rides in a steel channel that sits on the floor under the dinette. The purpose of this T is for in case of a RV roll over it will not allow the slide to seperate from the rest of the RV.
|
While I agree that the T serves as a stop to prevent the slide exiting the RV, I believe the T fixture is also there to guide the slide as it goes in and out.
As you said it rides in a channel that is mounted to the underside of a steel plate that is mounted to the slide floor.
I also agree that a T fixture that is not bolted to the RV is basically useless and a safety issue.
Thor Forums
