Thor Forums

[bevedfelker]

Don't know if anyone told you, but you can also adjust the tilt of the awning so that the condensation will run to the rear corner.

I attached a picture. Notice the black support arm running from upper left corner of picture to lower right corner. If you look closely at that support you can make out a series of dots on the arm. Those are adjustment holes. The bottom right lowest hole appears as a silver dot because that is the hole with the adjustment pin. You can adjust the forward and backward arms so that the awning tilts down and to the rear so the water will run off on the rear front corner of the awning.

The pin and holes work like the adjustable legs on a card table.