Table, Cabinet, & Step Cover
Attached are pictures of the table and step cover I made. I forgot to take a tape measure with me when I took these pictures but you should be able to get an idea of its size. The step cover was made out of good 3/4 plywood. I used aluminum angle right under the existing corner trim for it to sit on. We don't have pets so I didn't go closer to the door. The cleat I put on the inside edge is to keep it from sliding, note the space I let for it to drop into. We have the inside hand rail so I attach it to that when not in use. I painted some fake tile on it but they don't match to well. I forgot to drill a finger hole in it, On my to-do list.
__________________
|