|
OK, I'll give it a try, I lost my manual somewhere, but this is pretty much what it said.
1 drain the water tank.
2 make up a solution of ¼ cup household liquid bleach to one gallon of water for every 15 gallons of tank capacity, dilute in water prior to filling.
3 close all faucets and drains, fill the water tank with the rinse solution through the potable water fill
4 turn on the pump switch and circulate throughout the entire system
5 now fill the fresh water tank until it is full
6 close all faucets and drains and let the system sit for three hours and better yet drive around for a while.
7 drain the whole system using both tank drain and low point drains
8 now flush the complete system with fresh water until all the smell is gone
9 now fill the fresh water tank as you would normally do.
10 Have fun
__________________
|
Thor Forums
