My mistake, the low voltage error occurs at under 12.7 VDC. Below 12.7 Auto level will not function but you should be able to level manually. If the voltage drops below 9.5 VDC neither auto nor manual leveling using the jacks is possible.
If you have the LCD display on the jack control panel you can scroll through the display by using the up or down arrow and it will provide you with the reading of battery voltage.
__________________
Dave
US Army (Ret)
2020 Entegra Accolade 37TS
2019 Jeep Grand Cherokee Trailhawk (Toad)
FMCA - F432054
|