Quote:
Originally Posted by Chance
Thanks for update and clarification.
By the way, as I was looking for information on your model (assuming Thor would likely use it on Axis also), I found this which may be of interest.
https://cdn.shopify.com/s/files/1/12...84305689873449
It mentions a minimum of 11.5-Volt battery voltage. Don't know what to make of that.
|
Yeah, I've seen this. What they're saying is a minimum of 11.5 volts to the unit for it took function. I got service manual from Girard and it mentions that if voltages degrades to below 10, performance will suffer or it may work. If you access the unit directly on the exterior of the M.H. and open the white place cover to the circuit board you'll see three lights. The green is always on when you turn the unit on at the control panel inside. If you see a red light on, then the voltage is below ten. The yellow light just means that hot water is running. I'd bet that this unit would be on the AXIS since it's the current model they're selling to Thor.