Quote:
Originally Posted by brianh442
A new project I just finished; I added a drivers table for road trips. On my Miramar there is a hole on the floor just behind the doghouse for the oval table. Unfortunately the oval table is too large to have in place while driving, it's meant for when you are stopped and the chairs are turned inward.
While roaming the isles of camping world I found a mount for the pole that supports the oval table top. Next I went online and found a durable heavy duty tray table with 4 cup holders on the 4 corners. Using rough grit sand paper, I roughed up the bottom of the tray so I could apply an epoxy to the wood and the tray. Next I used a 1/4" piece of oak wood and marine grade G-Flex epoxy, I glued the oak to the bottom of the tray. Using 1/4" wood screws, I secured the metal table mount to the wood. I now have a small enough table tray to use while driving.
The tray table is ergonomic, as it is close enough and the right height so I'm not reaching down to the doghouse for drinks or snacks while driving.
|
Can you supply the link where you got the tray