Quote:
Originally Posted by WarEagleDan
...
Question:
Plugged in to shore power or running down the road, the Xantrex meter reads 13.6 volts. But as soon as you remove power the voltage drops to 12.4 volts. I'm still learning about 50 amp systems but I suspect that while sitting around CW during that 3-month window the batteries were allowed to go into deep discharge which probably ruined them. Is that a likely guess?
Thanx,
Dan
|
If you read the Xantrex manual you will see that if the engine or generator is running the meter displays the input voltage from the alternator or generator. If neither is running the meter reads the battery voltage.