Quote:
Originally Posted by dstankov
On the water heater, the valve on the bypass line should be perpendicular to the line. The valves on the hot and cold side should be in-line (parallel) with the water lines.
The valves in my attached picture are set for use.
Attachment 5026
Don't forget the bypass on the water control center in the wet bay. |
Thank you!!!!!
__________________
2015 Challenger 37KT
Progressive Industry EMS-HW50C, Winegard Trav'ler Sat dish, Magnashades, 5 star tuner, lots of indirect lighting.
|
Thor Forums
