|
Checked DC panel fuses, as well as the 3 amp fuse in control box - all good. Was able to pull the cover without disconnecting wires
One thing I checked was the 12V leads going to the box - nothing on my meter. Did have AC power to the outlet on generator power.
Checked both batteries - full charge.
I understand I have to have 12V going to it - that's why I tested the wiring going to the board. I removed every fuse I had on the rig and tested continuity with a meter. My panel is not labelled clearly, so I don't know what wires go where. Oddly I have two lights that have no power either, so I suspect a bad connection, but don't know where to look. At least in my house I can trace circuits from the breaker box - frustrating!
__________________
|
Thor Forums
