|
Thru trial and error codes E01, I've set the volts on my Miramar to 12.0 volts. I've found that if I set it lower than 12 volts it may not always start, and when it does not start, it gives the E01 code. Once I set it to 12 volts it seems to consistently start and recharge the batteries. I suppose it may have to do with the spike in volts when the gen starts or maybe something else is trying to start simultaneously with the gen and it's just enough at that split moment to go below the threshold the AGS needs to start!
As for the temp, I do recall in the owner's manual it says to set your air conditioners approx 5 deg apart if running more than 1.
I'm sure one of the Macgyvers of the web board will come along and correct me!!
Hope this helps!!
__________________
|
Thor Forums
