I didn’t remove the couch but I did lower the access door to the floor(less than 1"), and moved the table post storage brackets up to clear the tire. I put blue tape on the access door frame and couch frame. When you remove the screws holding the access door, setting it on the floor, you’ll measure the exact amount needed to relocate the door strikers. Look in the lower left of the bottom photo and you can see the tape I used.
I did a lot of measuring and head scratching before I pulled the shelf out. I’d recommend y’all do the same. I don’t know how precise thes things are built. What worked on one might not work on another.
Good luck,
Hugh
__________________
|