|
Here is a tip on programming the sensors:
Not sure how yours programs, but on my unit, you have to go into learn mode and let the monitor detect each pressure sensor, and then you assign the location as well as the min-max values.
Rather than run around my coach and plugging in sensors on each tire as I programmed it, I simply programed the unit in my garage by using a bicycle tire and programmed all of the sensors one at a time (the sensors activate upon seeing tire pressure).
Of course with this approach, when you assign each sensor to a tire location, you have to mark it so you can put it on the proper tire after programming all of them.
__________________
The only thing that works on a RV is the owner...
|
Thor Forums
