Slide out dimensions

[Munoz]

Hello everyone, I'm scouting locations to park our future motorhome. We are going to buy a Hurricane 34P. I work offshore on a 3 week on/off schedule. I'm currently at work and making diagrams of my locations. Now the only measurement I don't have is the width of the RV with the slides out. Does anyone know this off the top of their heads. I vaguely remember hearing the slides extend out 30 inches.
Trying to avoid calling the dealer. Nice enough guy but he has a hard time understanding we aren't buying until the house sells.
Thanks.

[gmc]

Don't see exact measurements online - but looking at your floorplan - you have 2 slides - both out the drivers side. If you figured adding 36" to width you would certainly be safe.

I have a 2014 Hurricane 32A - a slide on each side - but larger one is about 30".

[Chance]

If you scale off the floorplan which is a CAD drawing, you should be pretty close. I've done it for other Thor floorplans and then confirmed it in person and they have always been very close.

In this case the rear bed slide appears to be a little deeper, and scales around 27 to 28 inches; hence your 30-inch dimension should be safe.

Hopefully you'll get an actual measurement soon to confirm.

[Shawn62]

I use 32 inch for my 35M. This allows for the slide topper that extends past the outer side of the wall.

[Munoz]

Thanks guys. I used 30 inches and have a few feet of wiggle room so I think I'm good.