Owner's manual for AXXERA AV614BH

[Billyblur]

Thanks for the reply. I downloaded the firmware upgrade for the Axxera, and now the cameras are the right way round.

[perk]

Originally Posted by aa9zz

I just opened the Axis and when I turtned the Axxera 614 BH radio on, the back-up camera and some of the screens are reversed. Anyone know how to reset the polarity of some of the video screens?

I'm having the exact same problem. All 3 of the cameras (rear, left mirror, and right mirror) are outputting a mirror image. This means that the passenger mirror is showing on the screen as what looks like my driver's side, and driver's side mirror is outputting what looks like the image of my passenger side of the vehicle. To be clear, the image is showing correct outputs but the image shown is mirrored from what it should be. The same thing is happening with the rear view camera. It makes it very difficult to back up when the image is mirrored.

I've already located and tried changing the outputs on the video controller on top of the dash under the plastic panel. There is a setting for Nor-Mir and I have tried all settings but it doesn't change the output at all.

Is there another Nor-Mir setting on the back the Axxera unit that I need to switch? Is there something else I need to do? Thanks in advance.

[Billyblur]

I reset the radio and it reversed the mirrors back the way they should be

[anoland]

If yours is not working, it is easy to use the included tools in the radio box to pop out the radio and check that the connectors are plugged into the back of the radio.[/QUOTE]



Explain the radio box and included tools as mentioned above. Where are they and how do I use?

[smshah09]

How can I check if my Driver side view camera is connected and working. I get no signal message when I give left turn signal

[EA37TS]

Originally Posted by smshah09

How can I check if my Driver side view camera is connected and working. I get no signal message when I give left turn signal

Is the key in the on position or the engine running?

[smshah09]

Yes key is in the ignition turned on. While driving and making left turn I only see message on screen “No Signal” Right turn signal and camera and backup camera works fine

[16ACE27]

Originally Posted by smshah09

How can I check if my Driver side view camera is connected and working. I get no signal message when I give left turn signal

I would start a new thread with a title relative to your topic or problem.

[Beau388]

Originally Posted by anoland

If yours is not working, it is easy to use the included tools in the radio box to pop out the radio and check that the connectors are plugged into the back of the radio.

Explain the radio box and included tools as mentioned above. Where are they and how do I use?[/QUOTE]
Do an internet search for DIN radio removal tools. The tools are included in your Thor MC black cloth bag the dealer presented you when you bought the coach. A You Tube video explains how to use them.

[EA37TS]

Originally Posted by smshah09

Yes key is in the ignition turned on. While driving and making left turn I only see message on screen “No Signal” Right turn signal and camera and backup camera works fine

The issue will not be with the radio. The radio only has one camera input and that comes off the camera switch. The feed from the cameras go through the camera switch as the turn signals or reverse is selected. If any camera is displaying on the radio the radio is not at fault.

Not sure about your model but on the Challenger the switch was accessed by removing the top of the dash panel and it sat midway between the center console and the instrument panel.