Sent an inquiry to Thor CS asking how the pantry is removed and the initial response was release the locks on the 2 top slide rails. Two problems with that response. First, on my Challenger there is only one top slide rails and second they didn't address how to release the bottom slide rails. I responded that the response received was inadequate and I explained why.
Today I received a response from Ron Baker and was told that the bottom shelf of the pantry is screwed in place. That shelf must be removed and the after releasing the top slide rail lock the drawer must be unscrewed from the bottom rails to be removed.
Ron Baker attached an engineering drawing of the pantry and since it is copyright protected I have asked permission to post the drawing on the forum since there are others asking the same question. If/when I received permission (per the copyright notice on the drawing) I will post a copy.
Looks like a future mod is going to be to find and install some rails with releasable locks to replace the ones installed by Thor.
US Army (Ret)
2020 Entegra Accolade 37TS
2019 Jeep Grand Cherokee Trailhawk (Toad)
FMCA - F432054