Had Axxera radio unit replaced, it was sparking... Not that lucky....
Backup camera works great driving down the road however, turn signal cameras are really blurry, will not let you see whats in the lane. They work great when stopped. Does anyone know what brand the camera and lens are? Nothing in the manual. Can they be turned, rotated, something, to make the lanes visible?
Or are the mirrors vibrating so bad that there's no hope?
i hate to say this but it may be shaking mirrors. i had the mirror system on my semi and it really was worthless. i put a set on the side bulkhead that is where the door bolts into the truck very good results. maybe try a set on the body itself.
Thanks for the reply
I will check to see if they are loose. Never thought of that until I was writing the message. Don't see how this can be fixed unless the cameras are mounted somewhere else, like the one guy said.
The cameras mount from the inside of the mirror with a backing nut, PIA to get to. My cameras were tight, it was the mirrors that were loose. The system as a whole is not the greatest, poor picture quality, especially at night. At some point I'm going to remove my rear camera, check to see what type of connection it has, and probably replace it with better quality. Cameras are cheap and easy to find, just need to know what type of connector it has.
__________________ USMC Veteran
FMCA 101070S Dave & Myra One day your life will flash before your eyes,
make sure it's worth watching!