Windsport 35M rear sink issues

[GreatGitser]

We have a 2021 Windsport 35M, our sink in the rear bathroom allows very little water to flow thru. I normally use a pressure regulator on the city water valve set at 45-50 PSI. No other faucets have issues, only the rear sink. Any ideas where to look first. I don't see any issues/pinches under the sink.

[macdaddy1111]

Originally Posted by GreatGitser

We have a 2021 Windsport 35M, our sink in the rear bathroom allows very little water to flow thru. I normally use a pressure regulator on the city water valve set at 45-50 PSI. No other faucets have issues, only the rear sink. Any ideas where to look first. I don't see any issues/pinches under the sink.

Did work fine before? Have you snaked it?


Thor loves to use massive amount of pvc glue and creates spider webs for stuff to snag onto.

[GreatGitser]

we bought it lightly used, and it didn't come with any original paperwork.
we bought it as is, and the water always flowed slow from the spigot. Can it be snaked? Where would I access the line to even enter a snake?
Keep in mind, I'm partially disabled, and would most likely have to have my wife helping me.

[macdaddy1111]

Originally Posted by GreatGitser

we bought it lightly used, and it didn't come with any original paperwork.
we bought it as is, and the water always flowed slow from the spigot. Can it be snaked? Where would I access the line to even enter a snake?
Keep in mind, I'm partially disabled, and would most likely have to have my wife helping me.

Sorry, i read drain! Did you clean faucet aerator, it unscrews off faucet. Start with that.

Understand disability, got jack in the sand pits. Why mamma drives me around!

[RACarvalho]

Yes, on mine the bathroom faucet started to have low pressure/lil water coming out and the problem was a lot of wood dust in the aerator screen.
I cleaned that and everything was fine again....

[Dan-sr@perra-us.net]

Originally Posted by GreatGitser

We have a 2021 Windsport 35M, our sink in the rear bathroom allows very little water to flow thru. I normally use a pressure regulator on the city water valve set at 45-50 PSI. No other faucets have issues, only the rear sink. Any ideas where to look first. I don't see any issues/pinches under the sink.

I had a similar issue with the Bathroom sink faucet on my 2018 ACE when I purchased it in 2022. I removed the aerator and let the water from both the Hot and cold run for a bit to clear any debris from the pipe. Before I put the aerator back, I disassembled the parts and cleaned off the stuck-on crud from the screen and other parts. Be sure to remember how the parts were assembled so you can put it back together correctly.