Just want to add some update to my original post.
The
Sumo Springs and
Roadmaster Steering Stabilizer did not work for my 2021 ACE due to fitment issues. The parts I ordered
DID NOT fit the
2021 F53 model. Will wait for both manufacturers to produce New Parts that will fit the 2021 model.
I came across a thread in this forum about a possible fix on the
High Pitch Sound that might be caused by wind, going through the factory grill. The fix that some owners did was to install some sort of "honeycomb mesh" on to the factory grill. I ordered the honeycomb mesh and installed it behind the factory grill. I am hoping for 2 results. 1) To get rid of the high pitch sound and 2) To protect my radiator from rocks and other road debris. The mesh grill will not interfere with airflow as there are numerous holes on them.
For the install = I had to remove the OEM grill. It is held in place by 5 bolts. I then traced the opening using a cardboard and cut. I then traced the cardboard onto the mesh grill and cut. I drilled small holes at the BOTTOM of the brills so that the zip ties will not be noticeable. I used
4 Metal Tie Wires on each corner to make sure something will hold the mesh grill in place. The rest, I used
black zip ties.
I also installed a full set of
Sunguard window cover on all of my windows. The sun in Las Vegas is brutal during summer time. The sun gets very hot in the afternoon and is on the RIGHT side of my RV. In my previous Class C, the window rails (made of plastic) on the right side warped due the the heat. It made one of the right sliding window inoperable. I tried to make my own outside window cover using black vinyl material and suction cups. I did not like the result. Wasted $60 on materials. For the
Sunguard, I FIRST ordered the Front Wildshield, Left and Right FRONT Window covers only. It came with FREE wiper blade cover. I also ordered the Mirror Covers. I ordered mine with the "snap" attachment point (had to drill one hole). They also come with Velcro or Twist Lock (have to drill 2 holes for each twist lock). Installation was easy to follow. I had to drill a pilot hole, apply silicone sealant to the hole, also applied the same sealnt to the thread of the screw, before installing the other half of the snap (held by a screw). Fitment was GREAT! I like the 94% material, where you can see the outside, but they cannot see you inside (DAYTIME). I am sure they can see you at night with the lights on. You will have to close the curtain at night. The window covers do block the heat from the outside. I am so satisfied that I called them back and ordered 7 more custom size covers for the remaining windows. They manufactured and shipped my order in 2 Days. Ordered it from this company...
https://rvtoystore.com/
1. I still need to do the
wheel alignment.
2. Next project is the
Dog House Sound Deadening and
Floor Mat (Have the parts. Just need to work on the project).