Chf

[djnash]

For those of you that have done this I have a question. Did anyone have to use a breaker bar to get the nuts off. Mine appear to be put on with an impact wrench. I ask because I don't want to snap the nut off. Thanks in advance.

[singlestack]

Yes I had to use a breaker bar. I also read on one of the forums to torque them to 65lbs when reinstalling.

[penguin]

What is chf.

[singlestack]

Cheap Handling Fix. If you do a search you will find quite a bit of information. It is an adjustment that can be made on the front and rear sway bar on Ford F-53 chassis

[penguin]

Originally Posted by singlestack

Cheap Handling Fix. If you do a search you will find quite a bit of information. It is an adjustment that can be made on the front and rear sway bar on Ford F-53 chassis

Thank you sir for clarifying that. I wish people would STOP ABBREVIATING EVERYTHING.
Get the nuts off what?

[djnash]

Thanks to all. Will get it done today just didn't want to break anything. I have read all the posts even on irv2 must have missed the breaker bar post. To the other post chf(cheap handling fix).
I presumed everyone knew, sorry.
Again thanks for the reply.