|
|
01-13-2020, 07:04 PM
|
#1
|
Senior Member
Brand: Thor Motor Coach
State: New Jersey
Posts: 102
THOR #8931
|
Cup holder solution.
2018 Thor 37rb class A. I finally figured out a solution to the lousy cup holders in my RV. It is a product called squeak Swigzy. it is a cup holder with an adjustable base. It fits into your cup holders in the basics pans to lock it securely in place. I just got mine through the mail and tried it it works great.
__________________
|
|
|
01-13-2020, 07:06 PM
|
#2
|
I Think We're Lost!
Brand: Still Looking
Model: Tiffin Wayfarer 24 BW
State: New York
Posts: 22,195
THOR #8860
|
__________________
"What: me worry?"
Good Sam Member 843599689
Current coach: Tiffin Wayfarer 24 BW
|
|
|
01-13-2020, 07:18 PM
|
#3
|
Member
Brand: Still Looking
State: Florida
Posts: 39
THOR #16016
|
Till now i am looking for the better solution because up to get feedback from many source not feeling confident.
__________________
|
|
|
01-13-2020, 07:27 PM
|
#4
|
Senior Member
Brand: Thor Motor Coach
Model: 2018 24.1 AXISSIXxSIX
State: Arizona
Posts: 6,928
THOR #13932
|
There s a post on this forum, somewhere, explaining that a 3"to 4" abs pipe adapter works perfectly.
Abs does and pvc doesn't, or vice versa.
Maybe someone can find the thread/post.
|
|
|
01-13-2020, 08:35 PM
|
#5
|
Senior Member
Brand: Thor Motor Coach
Model: THOR Chateua 35SF
State: Florida
Posts: 5,850
THOR #11130
|
Any cup holder is better than mine...not a single one up front. The wife has to hold my cocktails when I drive.
__________________
Now an SOB
Traded Thor for Melbourne Prestige 24NP
2018 THOR Chateau 35SF
Two Labs, Bugsie & Blondie
Blondie passed in 2020 at 5 to Leukemia
|
|
|
01-13-2020, 10:58 PM
|
#6
|
I Think We're Lost!
Brand: Still Looking
Model: Tiffin Wayfarer 24 BW
State: New York
Posts: 22,195
THOR #8860
|
__________________
"What: me worry?"
Good Sam Member 843599689
Current coach: Tiffin Wayfarer 24 BW
|
|
|
02-23-2020, 04:32 PM
|
#7
|
Member
Brand: Thor Motor Coach
Model: Hurricane 34J
State: Illinois
Posts: 76
THOR #12548
|
[QUOTE=Bob Denman;219428] All three of them at once?
Sure! First wife in the passenger seat, the other two wives on the couch behind her.
I say “pics, or it didn’t happen”.
__________________
|
|
|
02-23-2020, 07:06 PM
|
#8
|
Senior Member
Brand: Thor Motor Coach
Model: THOR Chateua 35SF
State: Florida
Posts: 5,850
THOR #11130
|
[QUOTE=Cwray;224283]
Quote:
Originally Posted by Bob Denman
|
You musta seen me at a rest area somewhere!!!
__________________
Now an SOB
Traded Thor for Melbourne Prestige 24NP
2018 THOR Chateau 35SF
Two Labs, Bugsie & Blondie
Blondie passed in 2020 at 5 to Leukemia
|
|
|
02-23-2020, 08:37 PM
|
#9
|
Senior Member
Brand: Thor Motor Coach
Model: Palazzo 33.2
State: California
Posts: 252
THOR #12839
|
I used the white pvc 3" caps and then removed the stock holders, using a dremmel with ~1/4" sanding drum to cut the bottom out (use the small outside bottom of the cup holder as a guide for the sanding drum). This leaves a net opening that will fit the pvc cap snug. I then used black abs pipe glue to bond the cap to the holder and paint the white cap inside with satin black.
The result is a holder that cups or bottles fit perfectly and you can't tell it's not stock (except that it works!)
The 3" black abs caps are too thick so the OD is larger than you can open the stock cup holder base to fit, nor will it fit in the factory opening.
__________________
2018 Palazzo 33.2
|
|
|
03-01-2020, 03:02 PM
|
#10
|
Senior Member
Brand: Thor Motor Coach
Model: ACE 30.2
State: Massachusetts
Posts: 441
THOR #8180
|
I found these cups fit perfect including the handle part.
__________________
USN - RETIRED NUKE
Taunton, MA
|
|
|
03-11-2020, 09:16 PM
|
#11
|
Member
Brand: Thor Motor Coach
State: Texas
Posts: 33
THOR #18144
|
My drink holder needs to be a bit tighter because every time I slam on the brakes I spill my beer
__________________
|
|
|
03-11-2020, 10:22 PM
|
#12
|
Senior Member
Brand: Thor Motor Coach
Model: Hurricane 29M
State: New York
Posts: 150
THOR #5875
|
3" DWV couplers fit perfectly, and you can notch them to accommodate a handle if needed.
__________________
|
|
|
03-11-2020, 10:48 PM
|
#13
|
Senior Member
Brand: Still Looking
Model: Renegade Valencia 38RB
State: California
Posts: 3,497
THOR #3156
|
|
|
|
03-12-2020, 10:19 AM
|
#14
|
Senior Member
Brand: Thor Motor Coach
Model: Vegas 24.1
State: Michigan
Posts: 106
THOR #17787
|
A pony keg squeezes nicely between the seat and table. Just drink from the tap. No cup holder needed.
__________________
Capt Tom
Aviator, trailblazer, last of the big spenders, father of dragons, RV newbie
"What happens in my Vegas, stays in my Vegas."
|
|
|
03-12-2020, 08:47 PM
|
#15
|
Senior Member
Brand: Thor Motor Coach
State: Massachusetts
Posts: 576
THOR #12830
|
Quote:
Originally Posted by Hoser123
2018 Thor 37rb class A. I finally figured out a solution to the lousy cup holders in my RV. It is a product called squeak Swigzy. it is a cup holder with an adjustable base. It fits into your cup holders in the basics pans to lock it securely in place. I just got mine through the mail and tried it it works great. Attachment 22184
|
Expensive buggers
__________________
|
|
|
03-13-2020, 07:56 PM
|
#16
|
Member
Brand: Thor Motor Coach
Model: Citation Sprinter 24sa
State: Florida
Posts: 79
THOR #13813
|
For sprinter
Swigzy Car Cup Holder Expander Adapter with Adjustable Base - Rubber Tabs Hold Most 32 - 40 oz Bottles and Large Cups
Amazon's
Choice
for "car cup holder expander"
__________________
|
|
|
03-14-2020, 10:31 PM
|
#17
|
Member
Brand: Thor Motor Coach
Model: Hurricane
State: Texas
Posts: 41
THOR #14778
|
I take a koozie cut it in half and slide it into the bottom of my travel cup or bottle water, fits into the cup holder fine for me. And it stays upright. I am a koozie fanatic.
__________________
|
|
|
03-14-2020, 10:41 PM
|
#18
|
Senior Member
Brand: Thor Motor Coach
Model: Forest River Forester 235
State: Indiana
Posts: 4,884
THOR #6826
|
Quote:
Originally Posted by Lin S
I take a koozie cut it in half and slide it into the bottom of my travel cup or bottle water, fits into the cup holder fine for me. And it stays upright. I am a koozie fanatic.
|
Now that is a dandy idea!
__________________
|
|
|
03-15-2020, 06:50 PM
|
#19
|
Senior Member
Brand: Thor Motor Coach
State: New Jersey
Posts: 102
THOR #8931
|
Quote:
Originally Posted by HaRVey
I used the white pvc 3" caps and then removed the stock holders, using a dremmel with ~1/4" sanding drum to cut the bottom out (use the small outside bottom of the cup holder as a guide for the sanding drum). This leaves a net opening that will fit the pvc cap snug. I then used black abs pipe glue to bond the cap to the holder and paint the white cap inside with satin black.
The result is a holder that cups or bottles fit perfectly and you can't tell it's not stock (except that it works!)
The 3" black abs caps are too thick so the OD is larger than you can open the stock cup holder base to fit, nor will it fit in the factory opening.
|
How about some pics.
__________________
|
|
|
03-15-2020, 06:51 PM
|
#20
|
Senior Member
Brand: Thor Motor Coach
State: New Jersey
Posts: 102
THOR #8931
|
Quote:
Originally Posted by Pete'sMH
Now that is a dandy idea!
|
Also keeps your drink cool. Thumb
__________________
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|