|
|
06-23-2017, 02:16 AM
|
#1
|
Junior Member
Brand: Thor Motor Coach
Model: challenger 36 TL
State: Illinois
Posts: 18
THOR #6705
|
chf
Hello everyone ! I just done the chf on my 2017 Challenger 36 tl today. The front was quite a job,
but got it done. I have to take it to the dealer for
some issues to be fixed Wednesday next week, so
I am anxious to see what the response will be as
far as handling. Will check back in and let everybody
know what the difference is if any.
So long for now ! have a good one !
__________________
|
|
|
06-23-2017, 02:32 AM
|
#2
|
Senior Member
Brand: Still Looking
Model: Renegade Valencia 38RB
State: California
Posts: 3,497
THOR #3156
|
What was difficult in doing the chf. Normally its a 15 minute job unless youre removing tge sway bar and lubing the poly bushing
Jerry
|
|
|
06-23-2017, 12:21 PM
|
#3
|
Senior Member
Brand: Thor Motor Coach
Model: 37GT
State: Florida
Posts: 809
THOR #5246
|
The CHF (both front and rear) was certainly no 15 minute job for me, and I even had my buddy helping me. Heck, we had 15 minutes invested in slithering in and out from under the darn suspension to grab the right tools!
__________________
Full Time in 2017 Newmar Ventana 4369
pulling a 24' enclosed (Mini Cooper/Harley/Kayak)
(traded 2014 Thor Challenger)
US Army 70-73 Retired LEO
|
|
|
06-23-2017, 01:01 PM
|
#4
|
Senior Member
Brand: Thor Motor Coach
Model: Hurricane 35C
State: South Dakota
Posts: 1,132
THOR #3761
|
Our CHF was about an hour and a half total, split over 2 days because I didn't fit very well under the rear. :-)
__________________
John
2016 Thor Hurricane 35C with pups Piper and Annabelle
2013 Ford Fiesta toad
FMCA - F457085
Blog - https://traversity.us
|
|
|
06-24-2017, 01:04 AM
|
#5
|
Junior Member
Brand: Thor Motor Coach
Model: challenger 36 TL
State: Illinois
Posts: 18
THOR #6705
|
chf
Hi Jerry ! Well when you push the sway bar up to line up with the link, you
can't get the bolt back in, because the leaf spring is in the way. So, I had
to take the top bolt out of the link and assemble the link to the sway bar
at the bottom first and jack up the sway bar to get the bolt in at the top.
The rear was real simple, took about 15 minutes.
Robert
__________________
|
|
|
06-24-2017, 06:46 AM
|
#6
|
Senior Member
Brand: Still Looking
Model: Renegade Valencia 38RB
State: California
Posts: 3,497
THOR #3156
|
Hmmm Sorry it wasnt an easy job. I didnt have that problem with mine. Guess every coach is different. Think it took me about an hour to do both front and back. Back was harder because i didnt have a lot of room to work in and i did it by myself. Good you got it done.
Jerry
|
|
|
06-24-2017, 05:56 PM
|
#7
|
Senior Member
Brand: Thor Motor Coach
Model: Hurricane 35C
State: South Dakota
Posts: 1,132
THOR #3761
|
I also needed to use a scissors jack to move the sway bar to the new position to fit the links. It wasn't much, but the sway bar wouldn't budge without some mechanical help.
__________________
John
2016 Thor Hurricane 35C with pups Piper and Annabelle
2013 Ford Fiesta toad
FMCA - F457085
Blog - https://traversity.us
|
|
|
06-24-2017, 07:39 PM
|
#8
|
Senior Member
Brand: Still Looking
Model: Renegade Valencia 38RB
State: California
Posts: 3,497
THOR #3156
|
I used a bottle jack to raise the sway bar. Ive since pulled the sway bar off and lubed the bushings with poly lube. Now i can move tge sway bar with just my hand.
Dont know why Ford doesnt lube the bushings.
Jerry
|
|
|
06-24-2017, 07:46 PM
|
#9
|
Member
Brand: Thor Motor Coach
Model: Hurricane 29M
State: California
Posts: 73
THOR #7902
|
Are the Z bars on back supposed to come out if the bushings? Mine are not budging.
__________________
|
|
|
06-24-2017, 07:48 PM
|
#10
|
Senior Member
Brand: Thor Motor Coach
Model: Hurricane 35C
State: South Dakota
Posts: 1,132
THOR #3761
|
Ours did, made it a little easier. Looks like you just need to reverse it and reattach. You may want to lube it while it is free.
__________________
John
2016 Thor Hurricane 35C with pups Piper and Annabelle
2013 Ford Fiesta toad
FMCA - F457085
Blog - https://traversity.us
|
|
|
06-24-2017, 07:54 PM
|
#11
|
Member
Brand: Thor Motor Coach
Model: Hurricane 29M
State: California
Posts: 73
THOR #7902
|
Tried reversing. No go. Bolts aren't turning in the bushhing. Will WD 40 affect the rubber parts?
__________________
|
|
|
06-24-2017, 08:07 PM
|
#12
|
Senior Member
Brand: Thor Motor Coach
Model: 2017 Windsport 29M
State: Indiana
Posts: 3,692
THOR #5196
|
I had the same problem with the frozen z bolts on my coach. WD 40 won't hurt anything. I sprayed the bolts with penetrating oil, screwed the nut back on until it was flush with the threads, then used repeated hammer blows alternated with more penetrating oil, finally came loose. Most people don't have a problem, they just slide right out. My problem was composed by having the links frozen on the upper mounts too, fortunately they came loose easier. I feel your pain!!!
__________________
|
|
|
06-24-2017, 08:10 PM
|
#13
|
Member
Brand: Thor Motor Coach
Model: Hurricane 29M
State: California
Posts: 73
THOR #7902
|
Found the problem. The grippers on the bolt extend too far out and are engaging the bushing, not allowing it to turn freely.
If you can zoom in you can see the indentations in the bushing.
Shouldn't these be free wheeling?
__________________
|
|
|
06-25-2017, 02:14 AM
|
#14
|
Member
Brand: Thor Motor Coach
Model: Windsport 29M
State: Arkansas
Posts: 32
THOR #7152
|
chf
Quote:
Originally Posted by Makerofsawdust
Are the Z bars on back supposed to come out if the bushings? Mine are not budging.
|
how'd you make out?
__________________
|
|
|
06-27-2017, 01:39 AM
|
#15
|
Member
Brand: Thor Motor Coach
Model: Hurricane 29M
State: California
Posts: 73
THOR #7902
|
I put a washer between bushing and z bar bolt. Now the ridges bite into the washer and that allows the bushing to move. When the temperature gets below 110°, I'll crawl back under there and get picture if anyone wants one. I live out in the desert by the Marine Corps Training Center 29 Palms,CA. and it's HOT, HOT, HOT.
__________________
|
|
|
06-27-2017, 01:46 AM
|
#16
|
Senior Member
Brand: Still Looking
Model: Renegade Valencia 38RB
State: California
Posts: 3,497
THOR #3156
|
My ex work partner lives out there 4 days a week. His days off.
|
|
|
06-27-2017, 01:53 AM
|
#17
|
Member
Brand: Thor Motor Coach
Model: Hurricane 29M
State: California
Posts: 73
THOR #7902
|
It's actually quite nice here 8 months out of 12. But those other four months
__________________
|
|
|
06-27-2017, 01:57 AM
|
#18
|
Senior Member
Brand: Still Looking
Model: Renegade Valencia 38RB
State: California
Posts: 3,497
THOR #3156
|
Hes been out there a couple years now. Also has his apartment in Huntington beach. Stays at the beach only on work days
|
|
|
06-27-2017, 04:11 AM
|
#19
|
Senior Member
Brand: Still Looking
State: Texas
Posts: 6,187
THOR #2121
|
Quote:
Originally Posted by Makerofsawdust
I put a washer between bushing and z bar bolt. Now the ridges bite into the washer and that allows the bushing to move. When the temperature gets below 110°, I'll crawl back under there and get picture if anyone wants one. I live out in the desert by the Marine Corps Training Center 29 Palms,CA. and it's HOT, HOT, HOT.
|
I can see dealing with the heat, but what I can't understand is how you guys survive the dry air. Anything below 10% feels like an oven that sucks the water right out of your body. Being from Florida and Texas I like humidity.
I spent a few days in Ridgecrest not too far from there, and went for a 30~40 mile bike ride with a few guys from China Lake NAWS and it about did me in. I couldn't drink water fast enough; eventually running out before getting back. Fortunately the last few miles into town were downhill.
The desert, particularly as you get closer to Death Valley, is a different world I have a lot of respect for.
__________________
|
|
|
06-30-2017, 12:39 AM
|
#20
|
Junior Member
Brand: Thor Motor Coach
Model: challenger 36 TL
State: Illinois
Posts: 18
THOR #6705
|
Just a follow up on chf. As posted last week, well drove to the dealer for some other issues to be fixed and IMO it helped maybe about 30 % with roll and sway, but I am not going to waste my money on a road master rear sway bar that is only an 1/8 of an inch larger than the one on there now. Just my opinion.
Robert
__________________
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|