I made this after a quick trip home from Florida. I wanted a snack but didn’t want to stop. Juggling a bowl of chex mix on your lap while driving is not safe. I posted this in the Windsport/Hurricane site on Facebook but had not used it on the road. Well after another hard drive to and from Myrtle Beach for spring break, I love it!
I turned the stem to fit tightly into the cup holder. The top is 5 3/4 inches above the console. The top follows the contour of the console and bumps out 2 inches where the bowl sits. I left two inches to access the light switch and the 4 inch hole for the bowl allows me to look straight down to the leveler controls.
Attachment 16608Attachment 16609
I made this after a quick trip home from Florida. I wanted a snack but didn’t want to stop. Juggling a bowl of chex mix on your lap while driving is not safe. I posted this in the Windsport/Hurricane site on Facebook but had not used it on the road. Well after another hard drive to and from Myrtle Beach for spring break, I love it!
I turned the stem to fit tightly into the cup holder. The top is 5 3/4 inches above the console. The top follows the contour of the console and bumps out 2 inches where the bowl sits. I left two inches to access the light switch and the 4 inch hole for the bowl allows me to look straight down to the leveler controls.
Nice!
Did you make up a sketch with dimensions that you could share? I want to do this exact same thing for my Hurricane.
Attachment 16608Attachment 16609
I made this after a quick trip home from Florida. I wanted a snack but didn’t want to stop. Juggling a bowl of chex mix on your lap while driving is not safe. I posted this in the Windsport/Hurricane site on Facebook but had not used it on the road. Well after another hard drive to and from Myrtle Beach for spring break, I love it!
I turned the stem to fit tightly into the cup holder. The top is 5 3/4 inches above the console. The top follows the contour of the console and bumps out 2 inches where the bowl sits. I left two inches to access the light switch and the 4 inch hole for the bowl allows me to look straight down to the leveler controls.
Excellent workmanship! How much would you charge to make me one?
__________________ Dino & Angie
2017 Thor Windsport 29M 2012 Jeep Liberty Sport 4X4 (Toad) FMCA: F463694
Added the SeeLevel tank system. Put the monitor over the old, after removing old monitor. It was a bitch using the dremel to cut out the hole but got it done. Sorry no pics of step by step install only of the finished product
Here’s a very rough sketch.
I turned the stem to fit very tight into the cup holder. I didn’t have any 4x4 stock on hand and I was in a hurry so I went out a loped off some fence post in the chicken coop. It was a little high in moisture content. It was originally 3.740 dia. It has shrunk about .040 but still no wobble or movement.
If anyone is a competent wood worker the attached PDF is the design drawing for a Newmar passenger side armrest/workstation. You'll find them installed on BayStar and Canyon Star gas rigs if you want to see what it looks like. My 2019-2020 winter project.
__________________
2006 Hurricane 31D built on a 2006 Ford F53
Added the SeeLevel tank system. Put the monitor over the old, after removing old monitor. It was a bitch using the dremel to cut out the hole but got it done. Sorry no pics of step by step install only of the finished product
Added the SeeLevel tank system. Put the monitor over the old, after removing old monitor. It was a bitch using the dremel to cut out the hole but got it done. Sorry no pics of step by step install only of the finished product
After a long search and a lost deposit on an ACE, I pick up my new Hurricane 35m on April 5th. I had the dealer install a fireplace below the tv and looking forward to several other minor upgrades. Snap pads will probably be the first once I have the measurements.
Congratulations on your new rig. We have a 35M too. We added a fireplace and replaced the "L" couch with a wall hugger recliner. Welcome aboard, lots of info here.
Congratulations on your new rig. We have a 35M too. We added a fireplace and replaced the "L" couch with a wall hugger recliner. Welcome aboard, lots of info here.
PMORRIS92223,
Could you tell what fireplace you installed? I would like to do this in my 35M. We love the floor plan also.
Could you tell what fireplace you installed? I would like to do this in my 35M. We love the floor plan also.
Thanks,
Shawn
I’ll check the model. Not overly happy with the install. The dealer has ordered more wood from Thor to frame it out. I was going for a similar install to the Challenger. I am planning on rebuilding the cabinet over the winter to accommodate a bit more depth.