Johns Windsport mods

[jdmaag]

Just got done adding 6 of the 10 panels on the roof. Works great. I loaded it down and was able to produce 26 amps in direct sunlight. Very happy

[jpmihalk]

Originally Posted by jdmaag

Just got done adding 6 of the 10 panels on the roof. Works great. I loaded it down and was able to produce 26 amps in direct sunlight. Very happy

Nice!

[BandG]

JD - was your rig pre-wired for solar or did you need to run everything yourself?

[jdmaag]

Originally Posted by BandG

JD - was your rig pre-wired for solar or did you need to run everything yourself?

Was prewired from roof to area under bed.

[Kev]

Originally Posted by jdmaag

Was prewired from roof to area under bed.

That was my question. Mine is pre-wired and I didn’t know where the wires inside the coach were.

[jdmaag]

Originally Posted by Kev

That was my question. Mine is pre-wired and I didn’t know where the wires inside the coach were.

Mine was a orange and white wire, 10 guage, just laying loose on the floor

[jdmaag]

I wanted a powered vent up front but when I removed the inside shroud I found it was encased with aluminum. So I came up with the idea of using pan-do-it. It is an adhesive conduit on one side. I found a small round one about 1/2 in and a little bag of corner adapters and it worked great. Almost looks like it should be there. I drilled through the wall across from the antenna amp and hooked into that power circuit.

[jdmaag]

I needed a way to cover up the top window 9n the driver and passenger side so my wife and I came up with this. She cut the curtain where the top window and bottom window meet. Then hemmed them . I added a rod with rings and they clip to the lower curtain.

[gnach]

Originally Posted by jdmaag

Mine was a orange and white wire, 10 guage, just laying loose on the floor

Yep, my 2018 Axis too.