Originally Posted by Trophy1200
Don’t expect a response from the original poster, he asked his question almost four years ago and never returned.
Hopefully somebody else will be able to help.
That is because he must have used dynamite.
Now you will find that there are usually a screw on each side of the mount once backed out that will allow the set to be lifted out. The mount I purchased for the S&B use have two screws that must be loosened from the bottom. My exterior TV had to have the screws removed from the mounting palate and pulled out as an entire assembly. Use a flash light and a mirror to see the TV mount and how it was installed in order figure it out.