Low with High Beams 2019 Hurricane

[chrisngrod]

I made this harness for work. It was actually a fog with high beam mod as the vehicle I did it for kept the low beams with the high beams. It just disabled the fog lights. By law I think this is how it's supposed to be.

We'll be on the open road for a lot on our way to Vegas so I thought it might be nice to be able to use the low beams at the same time as the high.

https://youtu.be/2mQEGTvtnIU

Normally the low beams go off with the high beams unless you're pulling back on the stalk the whole time. I could modify it to include the fogs but that would get a little more complicated. Basically doubling up on my harness.

It does use diodes and a relay switch. This keep current draw from being too much on the high beams. Also there are diodes to prevent back flow of electricity.

[Lt Keefer]

Neat but I don't drive my RV after dark. In 40 years of RVing I have only driven after dark one time.

[Machinetools1]

Do you have a picture of your harness so we could copy it?

Thanks

[chrisngrod]

Only reason I have to drive after dark is because I'm 36 and still have to work. [emoji23]

I'm trying to take things at a slower pace but until retirement I gotta make good time more often than not.

https://www.subispeed.com/media/cata...-diagram_1.jpg

Only thing is you have to match the splitters with whatever your setup is.

I might be able to make some if there is any interest.