I have the freedom elite 22 fe which is not set up for a tv in the bedroom. We have figured out how to run the cable. Our question now is how to mount the tv. We will use one of 2 TVs. One is 2.5 pounds and the other is 7 pounds. We are considering a vertical wall mount which we would screw directly into the 2x2 wall stud. Does this make sense. The bathroom is on the other side of that wall and I am trying to get wiring and plumbing diagrams from Thor. It doesn’t seem that wires or plumbing would be attached to that stud
Having had the Four Winds version of 22e, I went through the same agony of trying to find a secure way to mount a 26" flat screen in the bedroom. There is nothing worthy of support in the inside wall structures. The best solution I came up with was to spread the load by bonding/screwing plywood to the wall spanning at least two studs then screwing the mount to the plywood Never followed through, got rid of it and bought a 29fe.
Making a smooth transition to senility for over 70 years
If I ever get my 30FE back from CW where it's been in the shop for 13 days for minor work, I'll shoot some pix of how I mounted ours.
On our last one, I did what someone posted above - a piece of 1x4 screwed vertically into the wall stud with 3 screws, stained the 1by to match the wall, and attached TV mount to that. a 24" TV hung there perfectly in over 10,000 miles on all sorts of terrain. It was still firmly in place when we traded it in.
2019 Thor Freedom Elite 30FE w/2020 Jeep Gladiator Toad
Living The Dream in "God's Waiting Room"