replace couch with recliners

[omar1951]

Originally Posted by JamieGeek

Well in our use case: we don't because we rarely, if ever, sleep in one. In addition: my goal with the recliners I purchased was to keep the center position for seating and also allow for the recliners to still be used as a couch for sleeping. So if its just one person sleeping on the recliners they just lie down on it like the couch that they are.
Attachment 27200

Got it. I like the setup. I was considering getting the ones with the divider that has the cup holders, but yours seems a little more feasible. Is the setup comfortable to sleep on?

[Bob Denman]

Originally Posted by omar1951

So if you want to sleep in one, how do you turn the genny off after operating the chair? My aim is to eliminate:
1) climbing the ladder to go to bed;
2) getting down from the overhang in the middle of the night to use the throne!

That couch in the Outlaws was never a great place to sleep... You basically had your ears right up against the furnace...
(Talk about loud!)

[halfprice]

Originally Posted by Bob Denman

I hope that ours can match yours for "nap-ability"

Bob I'm 6'4" and really a little to big for the recliner but I can still find a way to nap on them

[Bob Denman]

Originally Posted by halfprice

Bob I'm 6'4" and really a little to big for the recliner but I can still find a way to nap on them

Well; you sure got a "Fullprice" worth of height!

[JamieGeek]

Originally Posted by omar1951

Got it. I like the setup. I was considering getting the ones with the divider that has the cup holders, but yours seems a little more feasible. Is the setup comfortable to sleep on?

The center back folds forward and has cup holders in it.

It's very comfortable no matter how you sleep on it LOL.

[Jimbo56]

Well here’s how mine turned out. Via Shop4seats. The center console has storage. When you flip up the center back,reading lights appear. Has both usb and 120 vac plugs in storage area. Swivel tray tables fit in the arms. Seatbelts are useable. 4 self tapping 3/8 SS screws into the slide steel frame. Only 4 “ from wall. When recline the backs go down a little under the side window valance. I’m pleased.

[Rysiek]

They look great! I went with Shop4seats as well. Got the recliner and 2 captain chairs for 2015 Axis 24.1 Best upgrade so far.

Originally Posted by Jimbo56

Well here’s how mine turned out. Via Shop4seats. The center console has storage. When you flip up the center back,reading lights appear. Has both usb and 120 vac plugs in storage area. Swivel tray tables fit in the arms. Seatbelts are useable. 4 self tapping 3/8 SS screws into the slide steel frame. Only 4 “ from wall. When recline the backs go down a little under the side window valance. I’m pleased.

[rudyhehn]

Make sure you check under the couch seats. In my rig the floor is not flat and has a raised section from the compartment underneath. You cannot replace the couch with recliners.

[omar1951]

Originally Posted by rudyhehn

Make sure you check under the couch seats. In my rig the floor is not flat and has a raised section from the compartment underneath. You cannot replace the couch with recliners.

That's why I haven't pulled the trigger yet. I still don't get how you can bolt recliners with a 36" base to a slide-out floor that only moves 18". You must have to construct some sort of stand-off. My rig's in storage right now, so it'll be spring before I look into it in depth. In the meantime, I wrote to Thor to get some dimensions regarding the overall movement of the slide-out, and how much space I have between the interior wall of the slide-out and, say, the wall where the fridge is. No sense in installing something that I can't extend fully!

[KarenMN]

Originally Posted by DocMike

Our recliners went in as three sections, right recliner, left recliner and center console.

WP_20160115_17_01_04_Pro.jpgWP_20160115_16_44_32_Pro.jpg


Doc

How has your upholstery held up?

[Rhamilton001]

I want to replace also, but what has everyone done with the old ones.

[Beau388]

Originally Posted by Rhamilton001

I want to replace also, but what has everyone done with the old ones.

I traded my old pealing couch for the labor to install the new loveseat.

[Jimbo56]

Originally Posted by Rhamilton001

I want to replace also, but what has everyone done with the old ones.

I sold mine on FB marketplace for $250

[Rhamilton001]

Thanks, my couch is in perfect shape and I don't see a market for them. I really don't have enough space to store.

[Jimbo56]

Originally Posted by Rhamilton001

Thanks, my couch is in perfect shape and I don't see a market for them. I really don't have enough space to store.

Mine was like brand new. That’s why I listed it at a competitive price on FB. Sold in 48 hours.

[Rysiek]

I sold

Originally Posted by Jimbo56

Mine was like brand new. That’s why I listed it at a competitive price on FB. Sold in 48 hours.

I sold the couch and 2 captain chairs on OfferUp site in 24 hours. I had quite few offers.

[suekurtz]

Your recliners look great. Are these connected to power or are they operated manually.

Thanks,
Sue Kurtz

[Rysiek]

Originally Posted by suekurtz

Your recliners look great. Are these connected to power or are they operated manually.

Thanks,
Sue Kurtz

They are connected to power. Behind the sofa bed, in the left corner there is a junction box. That is where I installed additional 2 outlets for the recliners.

[wchambers630@aol.com]

We have a 2015 Thor Chateau we just replaced our couch with 2 Power Recliners removed the couch/bed 3 pieces Recliners came with backs off and no center console fit perfectly in 66" space installed on slide out purchased at Value City furniture store.

[Jimbo56]

Originally Posted by wchambers630@aol.com

We have a 2015 Thor Chateau we just replaced our couch with 2 Power Recliners removed the couch/bed 3 pieces Recliners came with backs off and no center console fit perfectly in 66" space installed on slide out purchased at Value City furniture store.

How did you attach them to the floor? Pictures?