Rex's 2017 22FE Class "C" modifications thread

['52 F-3]

Got my decals made finally; Brown and Bronze (so far)
Plan is to look like a 78 Minnie Winnie, but replace the "W" with a Thor style "T". Later I'm going to get another stripe to go across the hood, but first see how this looks.

[99dart]

Originally Posted by '52 F-3

Didn't have a nice spot for a trash (and recycling) can. This cabinet wasn't being used, and I had the left over drawer parts from when I cut down the dinette bench. Each is only a 2.5 gallon bathroom can, but they are out of the way....

also our "dust buster" mounted and step I made so the dog can get up/down from the bed

Well done, Sir! Looks great!

['52 F-3]

Decided to put smallest decals on first, get a little practice before the large side ones....

Well, I looks different. I'll most likely add thicker stripes just above tail lights later.

[ravenousbambino]

Hello Rex, any update on the trailer brake control? I can’t seem to get the chassis to acknowledge the brake controller. I’m wondering if it’s even possible.

[DWaltee]

'52 F-E said " I did a little testing and found fuse box was already wired up, just needs 4 fuses and 4 relays installed. Finding the 4 wires that are the outputs were easy, but the 4 that go the switches proved to be very very difficult. I ended up chasing the wires from the fuse/relay box and pulling them out of the harness..." If you don't mine me asking, how exactly did you splice the wires to get power up to and back out from the aux switches? Not a lot of information online on installing them in the stock dash position. Any help would be greatly appreciated...