Quote:
Originally Posted by jdharrington
Information on how you did the installation of the gutters please?
|
Cleaned the area with alcohol. The gutter has 3M self adhesive tape. Start at one end by peeling the tape's protective back a foot or so. Start the gutter where you want and pull to align, then push the gutter against the MH. Pull some more of the protective strip away and repeat. For the drip ends I used 3M 5200 behind and a single stainless steel screw through the flat back into a pre-drilled hole. Slathered the screw with 5200, snugged it up.
Everything is still in place and working like I installed it yesterday.