Thor Axis mods - sewer / voltage / camera monitor

[YoungclassA]

I'm a little late to the party, just bought a 2016 Thor Axis 25.2. The first mod I did was fix the BIRD - my BIRD power wire was wired to the chassis battery, not the coach battery. Simply swapped posts and now it's working.


I installed this USB-C / voltage monitor / USB socket in place of the usb/hdmi socket connected to the radio. I reconnected the usb/hdmi so you can use it in the future.

Then I installed this monitor. I had to use the rear view safety adapters and then wire up 12v power to each one. The monitor is low enough it doesn't block the view but now I can actually see what is on the cameras.

Next up was adding a macerator pump. With a 45 and 90 I was just able to fix the pump on a downward slope. I also added a torpedo black tank flush, you can see the fitting in the upper right of the photo. Then swapped out a locking for non-locking latch on the sewer access door. Really happy how it all turned out.

[YoungclassA]

A little better view of the adapters used with the pump.

[ducksface]

Nice mods.