I have a 2014 Thor Palazzo 36.1 and I'm not happy with the wet bay configuration / Kantleak performance. I'm curious if anyone has remodeled that area and if so, did you install a different fresh water management system (i.e. Nautilus P1 or P2) or just go back with the same old, same old?
Palazzo 33.2 owner also unhappy with Kantleak system
I am also very unhappy with the Kantleak system in my wetbay. I have replaced the part that comes in the repair kit 3 times, and it's already failing again after only two weeks of actual use. Anderson Brass is good about sending out the repair kit at no charge, but I'm tired of the quick failures. I had not heard about the Nautilus system until your posted question, and now that I've looked into it, I may have to take steps to replace my leaking Kantleak with a Nautilus P2!
I had a Palazzo before thus my interest. At another Forum(not sure if you can list the name here?), there is a thread entitled Anderson Valve and within that thread several Palazzo owners have revamped their Wet Bays. They have removed the Anderson Valve, etc. Pictures included. When I had mine, I moved the water filter and water pump to the Wet Bay, thus removing about 24 feet of Pex pipe.
2018 Four Winds 31Y
Thanks ctpres, but it's more than that ... In my case it's leaks, component placement / access, and very poor space utilization ... For example I'd like to put a hose reel in there, but the way it's configured currently that'd be tough ...