The Autoformer Mod
Thanks to Ron for doing this mod first. This is my write up on it.
For those of you that have an Autoformer, here’s how I hardwired mine. Doing this keeps it hidden, secure, and dry. It also allows you to remove the Autoformer and still have power to your rig.
I removed the junction box and attached the Camco ends. Male plug to the rig and female plug to the power cord. Male handle was cut off to give space. Felt pads were placed on power cord reel to prevent rubbing. Angle irons were installed to keep the Autoformer from shifting in transit.
Parts needed:
1. Autoformer
2. Camco 50 amp ends, male and female.
3. Zip ties, electrical tape
4. 2 pieces of angle iron and screws
5. Felt pads
__________________
2016 DRV38RSB3
2015 Ram 3500 Regular Cab DRW CTD Asian trans 410 rear
|