oil bath o ring

[safedave]

I am trying to find the correct o ring for my axles. The cap doesn't have any numbers on it. it only says that it is kodiak. I believe they are 9k axles. Measuring the od for the cap, it is about 4 1/4 inches. A point in the right direction would help. Thanks.

[Desmo888]

There should be a makers mark near the pumpkin either on axle housing or pumpkin itself. Find that and then you can get the specs online.

[lwmcguire]

E Trailer

[Porthole]

Originally Posted by safedave

I am trying to find the correct o ring for my axles. The cap doesn't have any numbers on it. it only says that it is kodiak. I believe they are 9k axles. Measuring the od for the cap, it is about 4 1/4 inches. A point in the right direction would help. Thanks.

9K is a good guess, but it could be any of the 3 sizes.

PM me an email and I'll send the Kodiak 9K (actually 10K) breakdown sheet.

Or you can try this: (not my info)

Q-10-14K-PCAP – Polycarbonate dust cap.
The O-rings on these caps are not available separately from Kodiak. However, I was able to buy #239 Viton, 75A Durometer, round, brown O-rings from Amazon. They are 3-5/8″ ID, 3-7/8″ OD, 1/8″ width.

[safedave]

A big thanks to Porthole for providing me the information to find the correct part. Without his help I'd still be scratching my head.