Hydraulic solenoid connections
This post is attended for DRV owners.
When rebuilding my front jacks, we noticed that the lower jam nuts were loose, all 4 of them on the solenoid. This could cause a higher draw of voltage and may even damage the solenoid over time. Even though the upper jam nut was snug, I could grab a connector and move it side to side. More then likely, the lower jam nut is loose. If you need to tighten the lower jam nut, make sure that you disconnect the battery, as you would not want to cause an arc. Deal with one connection at a time, so that you do not mix up what needs to be connected. My hydraulic motor connection was good on both sides, but you should check that also.
__________________
2016 DRV38RSB3
2015 Ram 3500 Regular Cab DRW CTD Asian trans 410 rear
|