Have had our 2016 Vegas 24.1 for a few weeks now and are about to test out the unit this weekend. Question is where is a good spot to attached PVC pipe to store the Rino sewer hose. The dealer told me there is no real good spot for a storage pipe. I told the dealer I would find out from the the forum.
I recall reading about this before we purchased but could not find a search options.
Another quick question is about the wheel alingment and is it best to find a RV shop or can a ford dealer that service large trucks take care of it as well.
Thanks in advance
1st sleeping night is coming up this weekend and should be a blast!
I would take it to a truck/tire facility. They know a bit more than most Ford shops unless they are set up to handle trucks/RV's. It is probably cheaper. My 2014 ACE had some toe out which the technician explained causes wandering on the road. One tire fights against the other going down the road which means constant steering corrections. It was well worth the $150 I spent.
For a two week trip we just tie wrapped a 4 inch plastic post cover to the top of the bumper starting on the passenger side. It worked well. We may paint it and leave it there. I drilled drain holes and put caps on both ends.
Below is a link and some pics of my sewer hose storage. Works quite well and holds my 20 ft. Rino with fittings. Not sure if you want to get into it that far as there are some easier setups. I carried my hose in a plastic trash bag for a few trips until I installed this setup. http://www.thorforums.com/forums/f17...orage-966.html