One of our slide out awning anchors on the left side somehow got torn out. When we tried to replace it we cannot get screws to go back in the holes. We tried several sizes - no success. Any suggestions?
If they are broke off in the holes: you'll just need to figure out a way to move the mounting points over a little bit. (Maybe a half-inch...)
If they tore out of the holes: fill them with epoxy, and re-drill some pilot holes. You should then be able to get things back in place easily.
Good Sam Member 843599689
Current coach: Tiffin Wayfarer 24 BW
"History shows again and again; how Nature points out the folly of Man!"