It’s a simple system. Below is how I would check it out.
1. Check your fluid level
2. Make sure all of your lines are connected at the pump, any connection unions and at the squirter tips.
3. Test to make sure the pump is getting power and a ground.
A. If there is power at the pump, then replace the pump
4.if there is no power at the pump, check the fuse and relay. If those are good, you have a wiring problem or the wiper switch likely is bad.
Hope this helps
__________________
2016 DRV38RSB3
2015 Ram 3500 Regular Cab DRW CTD Asian trans 410 rear
|