Cutting Board Cover on 16 Inch Circular Sink

cowboy21 · 09-16-2021, 10:20 PM

We have a Thor Majestic 19G (purchased used from Cruise America). It has a 16 inch round sink. I'd like a cutting board that would fit over it. Most of the internet searches are close to useless. They show rectangular boards for sinks or circular pizza boards. Airstream has one that looks good but for $$$.

I have a friend that has a Thor Gemini with the same sink. Their cutting board cover fits on my Majestic. I'd like to find the same cutting board. I have a message into Thor to see if they have one that would fit. Any help would be appreciated.

Grumpy Grampa · 09-16-2021, 11:09 PM

Take it to a cabinet shop, they can make one for you.

**16ACE27** · 09-17-2021, 02:07 AM

$13 at Lowes

https://www.lowes.com/pd/Metrie-18-i...nel/1001305850

OldWEB · 09-17-2021, 02:13 AM

WOW! Good find ACE!

I was going to suggest first finding a cutting board 16" for low $$$.
You can then cut it into a circle and router the bottomside edge to fit inside the sink to keep it still.

OldWEB · 09-17-2021, 02:18 AM

Oh, and welcome to the campfire cowboy21!

CHS · 09-17-2021, 10:40 AM

I bought one of those high-density polyethylene commercial type cutting boards, cut it to size then mounted 2 pvc wood slates, one on each side to keep it stable on top of sink. Countersunk the SS screws to hold wood in place. Works great.

https://smile.amazon.com/dp/B01M0BEB...ing=UTF8&psc=1

chunker21 · 09-17-2021, 11:13 AM

Quote:

Originally Posted by CHS

I bought one of those high-density polyethylene commercial type cutting boards, cut it to size then mounted 2 pvc wood slates, one on each side to keep it stable on top of sink. Countersunk the SS screws to hold wood in place. Works great.

https://smile.amazon.com/dp/B01M0BEB...ing=UTF8&psc=1

Something like that can be easily cut with a jig saw and as stated above, pegs on the bottom side to hold in place. Use the leftover cut out material to make your peg/legs and epoxy in place.

**16ACE27** · 09-17-2021, 01:03 PM

For "feet" on home made covers/cutting boards I have used non-marking, food safe rubber feet that just fit inside the sink to hold the board in place but also work as feet when using the board on the countertop as a cutting board.

$7 at Amazon

https://www.amazon.com/Clear-Medium-.../dp/B01E88E80C

You may also like: