Hose storage

[nyles@gentzfinancial.com]

Anyone ever use one of these?
Easy to mount under RV?

[Bob Denman]

I put one of them under my Outlaw 29H, and it worked very well.

[paulwadley]

I put one under my 2018 Thor Siesta 24SS just behind the rear wheels. I used very large metal hose clamps(worm clamps) to attach it to the underside. It opens just behind the rear passenger compartment so that that compartment door has to be open to gain access to the sewer hose. It works great. I also carry a short 5 foot sewer hose in a large plastic bin with a lid that I use most of the time since I try to park near the campsite sewer dump.

Paul

[Martian]

Your hose will last a long time using one of them. You will not be sorry you got it as it is well worth the price. Happy camping!

[CHS]

I made one out of this. It's 1 inch larger than the standard 4 inch sold for RV hoses. I can fit the fittings along with the hose.

https://www.lowes.com/pd/Freedom-Fit...eve/1000863952

[Judge]

I purchased two of them and assembled the parts in such a way that I have it extend the entire rear width of my Magnitude SV34. I have a door on each end so I can remove the host from either end. I am able to store 4 ten foot sectons in it.

[Bluetreak]

Originally Posted by CHS

I made one out of this. It's 1 inch larger than the standard 4 inch sold for RV hoses. I can fit the fittings along with the hose.

https://www.lowes.com/pd/Freedom-Fit...eve/1000863952

What did you use for endcaps and how did you secure them?

[Lambchop]

I mounted mine to the top of my rear bumper with heavy duty zip ties. It works beautifully.

[CHS]

Originally Posted by Bluetreak

What did you use for endcaps and how did you secure them?

Sorry for the late reply, I missed it somehow. They also sell caps that size. I misplaced one so I only use the bungee on one side.
I drilled a hole horizontally through both ends and pushed through a eye bolts then a small bungee across the span. Works great.

[Bob Denman]

I would think that leaving one end open; allows things ti dry out after each use.

[Party of 5]

I believe I read somewhere the Omni BH35 appears to ride low to the ground. I would certainly like secure something like this under my rig. Has anyone been able to secure these to the BH35 without it/them being knocked off while driving over a driveway or campground??

[Jimbo56]

Originally Posted by Lambchop

I mounted mine to the top of my rear bumper with heavy duty zip ties. It works beautifully.

I did same as you. Hitch is in the way under the bumper.

[raffaelli]

Anyone mount one of these under a C Class? I was looking around for room for it but nothing was obvious.

[Bob Denman]

Mine was mounted back by the hitch frame; under my "C".

[paulwadley]

I mounted an expandable sewer hose holder under the rear end of my class c. Easy job and secure.


Paul

[CHS]

I did under my Chateau 28Z. Used angle brackets behind the Electric Stabilizers.
See Post #9 Look closely at the bottom photo.

Originally Posted by raffaelli

Anyone mount one of these under a C Class? I was looking around for room for it but nothing was obvious.

[raffaelli]

Originally Posted by CHS

I did under my Chateau 28Z. Used angle brackets behind the Electric Stabilizers.
See Post #9 Look closely at the bottom photo.

Looks like the tube and the stabilizers are outside the protect of the skid plates on the hitch?

[Gitanillo]

We have a 2017 Siesta and we carry two ebikes that requires a hitch extension (9 inches). I bought two 5 ft 90 degrees steel angles and welded them 4 inches apart to the hitch extension. Then I secured the tube using steel straps. I initially used 4x4 PVC post sleeve but it was too tight for carrying the Camco hose.

[Lambchop]

Where did you get the clamps with the rubber/plastic guards?

[Gitanillo]

I used pipe insulation and cut them to fit the clamps.