Omni charge line Part deux
Quote:
Originally Posted by chunker21
It seems that newer Fords that have the trailer tow wiring have to be connected to a trailer and the trailer detected in order to get the 12v charge line to provide the 12v. I did a google search of Ford trailer charge line and brought up several articles, primarily from Ford truck forums, that addressed the issue. You have to connect to the trailer and engage the brakes to activate the 12v charge line. Either press the brakes or activate trailer braking on the dash. There was also explained a way to bypass by installing a jumper wire on the trailer tow module which would make 12v constant.
My toad isn't finished with the lights wiring yet so I can't connect yet to check that. Next couple days will finish it and hopefully all will be well.
|
As it turned out what I posted on the other thread is correct. I did finish the toad wiring including an RVI "toad battery charger" and hooked up. It wasn't until I engaged the brakes that power went to the toad battery. Wish I had found those articles earlier and it would have saved a lot of creeper time.
__________________
2022 Renegade Valencia 35MB
2021 Jeep Gladiator
2019 Harley Davidson FLHTC
2012 PT Crusader 355BHQ
|