Quote:
Originally Posted by pstandiford
Found the three screws. But the way this is designed there is no way to get to them to remove the “bedside cubby”. Of course the pocket holes are torn out on two of them. Problem is that I can’t get at the screws to put them back in once the piece is back in place. I’ve removed the panel that slides in so I can get at the screws. And then I’m going to make the panel narrower and either staple it or screw it in place.
|
You have a coach from a different Thor MC factory with a different coach design, but the same general idea of a bedroom slide. Since in most designs, the mattress and foundation move; but the bed frame does not, the end rollers are actually between the mattress foundation and the bed frame and not under the slides floor like in most other slides. This allows for all the electrical equipment to be located under the bed.
I had the opertunity to watch a coach, similar to mine, be assembled on the factory floor and ask general maintenance questions such as, how do you get to that? That two hours in the factory has really helped in deciding what modifications and repairs I should make and what not to try.