Propane connection

myquantumLC27 · 09-05-2021, 09:18 PM

[I]Does the 2022 Quantum LC27 have a external propane connection for gas grills/firepits?

taylorbob1 · 09-05-2021, 09:35 PM

May depend on the year
I’m not familiar with the model
But if you search the Internet for images & specs of your year and model you might find what you’re looking for

paulwadley · 09-05-2021, 10:00 PM

I just looked up the 2022 Thor Quantum and the only models that have the exterior propane connection are the following models: JM31, KW29, WS31, LF31. There is no listing for a 2022 Thor Quantum LC27. They have the LC22, LC25 and LC26.

Paul

taylorbob1 · 09-05-2021, 10:23 PM

It’s a fairly straight forward mod if you decide to tackle yourself

Option 1: add an Extend a Stay valve at the tank, then use a long hose to your desired grill location

Option 2: insert a T into the propane line near your desired grill location. The T is best to place near the cooktop, fridge, water heater
Other than routing line thru floor, climbing under your rig & fish-lining flexible propane hoses…it’s a simple process

All fittings and hoses can be purchased on internet, Amazon or local hardware store.

Use the SEARCH function on this Forum to see how others have done it

Pete'sMH · 09-06-2021, 12:50 AM

Or option 3. Install a Tee fitting to the output side of the regulator at the tank and use a long hose with a quick connection fitting. It’s easier and cheaper than the other methods.

taylorbob1 · 09-06-2021, 01:58 AM

Quote:

Originally Posted by Pete'sMH

Or option 3. Install a Tee fitting to the output side of the regulator at the tank and use a long hose with a quick connection fitting. It’s easier and cheaper than the other methods.

We assume that OP wanted low pressure so he can make a direct connection to grill.
So…I stand corrected, extend a stay is placed before the regulator

Thus, Option 3 is preferred over Option 1 for what the OP is desiring to do.

That is, connect a low pressure hose directly to the grill. Therefore the extension hose must be placed after the regulator.

The photo below is an extend a stay properly placed before the regulator