Sequence sewer hose

[BobLundin]

I will go over some of the items found in our new Class B but a question now:

The side of the van has a tube for storage of the sewer hose. The problem is the adapter for the 90 degree attachment does not fit in the tube - only the part that fits onto the van sewer connection.

I would like not to store the hose in the compartment so wondering if there is another solution?

0--------- fits in the tube. 0--------0 does not.

Thanks / Bob Lundin 2022 Sequence

[16ACE27]

Search the Forum, common discussion item on those RVs, seems most people give up and install a different holder.

[coachray]

Some people make tubes out of pvc and then mount them underneath.

[abjbrtd]

We have a older Rino brand hose, the 90* screws off and back on at each campground.

If you try this type connection make sure the 90 will come off!

Take a look at this, it might solve your problem

https://www.amazon.com/Valterra-D04-...%2C346&sr=8-54

Let us know for future inquires.

[BobLundin]

Thanks - I did a search on this site and found someone used a 4x4 post sleeve. I got one at Home Depot and cut it to about 30", drilled some holes to prevent the hose from falling out, attached the screw-on end to the hose, and painted it black. I will use bungy (sp) cord to attach it to the bike rack and it works.

Now I do not have to screw the end onto the sewer hose every time I use the twist on 90 degree connection.

Great forum - Thanks / Bob Lundin

[16ACE27]

Originally Posted by BobLundin

Thanks - I did a search on this site and found someone used a 4x4 post sleeve. I got one at Home Depot and cut it to about 30", drilled some holes to prevent the hose from falling out, attached the screw-on end to the hose, and painted it black. I will use bungy (sp) cord to attach it to the bike rack and it works.

Now I do not have to screw the end onto the sewer hose every time I use the twist on 90 degree connection.

Great forum - Thanks / Bob Lundin